Can the AIMTOM 42000mAh 155Wh Portable SPS-155 run your CPAP or other small medical devices?

SPS-155 can run your CPAP or other small medical devices only if their steady draw stays within 100W and they accept 110V AC.

AIMTOM SPS-155 42000mAh Power Station
AIMTOM SPS-155 42000mAh Power Station
4.3/5 from 3,273 ratings
$126

Check price

For your own setup, check the device’s running wattage first, then match its voltage and plug type before you plan an overnight use case.

SPS-155 battery and outlet ratings determine CPAP compatibility

The SPS-155 has a 155Wh battery and a 100W AC outlet rating, so the answer depends on the CPAP’s continuous draw, not its startup label. We picked it for a full review because those two figures decide the outcome for this use case. The inverter type is not stated, so you should not assume a pure sine wave output for sensitive medical gear. A CPAP is a small air pump with a battery behind it, and that makes wattage and runtime the two numbers that matter most here.

You can find our final verdict in the full AIMTOM SPS-155 review.

What to Check Before Buying the SPS-155

  • Check your CPAP’s running wattage. The SPS-155 supplies 100W on AC, so a device that draws more will not be a fit.
  • Check whether your medical device needs a pure sine wave. The inverter type is not stated, so this matters for sensitive electronics.
  • Check your expected runtime in watts, not just in hours. A 155Wh pack can empty quickly if your CPAP draws more power than you expect.
  • Check for any startup surge or inrush current. Motors and compressors can ask for more power at start than they use while running.
  • Check whether your setup needs pass-through charging. The charging modes are AC wall, car port, and solar panels, but stable simultaneous use is not stated.
  • Check for a low-battery warning or auto shut-off threshold. That detail is not stated, and it matters if you need overnight warning time.

Where the SPS-155 Sits Among Portable Power Stations

The SPS-155 sits in the small portable power station class, not the 300Wh overnight-backup tier or the 1,000Wh range used for longer appliance runs. If you need a unit for a CPAP, a phone charger, or another low-watt medical device, its 110V AC output and 3.48lb weight make it easy to place in a carry bag. If you need longer sleep-cycle runtime, higher surge headroom, or a confirmed pure sine wave inverter, you should look at larger or more specialized portable power stations instead. Choosing the wrong size here usually means a return and a second purchase.

If you are on a budget, see affordable power stations for small apartments.

Choose the SPS-155 if your CPAP or medical device stays under 100W and you want a compact 155Wh station with AC, USB, and 12V outputs. Skip it if your device needs more wattage, longer runtime, or a stated pure sine wave output.

Scroll to Top